Steelcraft-automotive 53300 GRILL GUARD Manuel d'utilisateur télécharger pdf

GRILLE GUARD

07-12 TOYOTA FJ CRUISER

Page 1 of 4 4/30/12 Rev 1 (DP)

PARTS LIST:

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ

INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. DO NOT ATTEMPT

INSTALLATION ALONE; PERSONAL INJURY OR DAMAGE TO THE VEHICLE MAY

RESULT.

2. Remove the factory skip plate if equipped. Starting behind the front bumper on the driver side,

locate the section of rectangular frame channel attached to the back of the bumper, (Figure 1).

Insert (2) 10mm x 120mm Hex Bolts with (2) 10mm x 30mm Large Flat Washers into and down

through the (2) vertical holes in the top of the bumper bracket, (Figures 2 & 3). Select the

driver side Frame Mounting Bracket. Line up the (2) slots in the Bracket with the (2) 10mm Hex

Bolts. Secure the Bracket to the bottom of the bumper bracket with (2) 10mm x 30mm Large

Flat Washers and (2) 10mm Nylon Lock Nuts, (Figures 4A & 4B). Do not tighten hardware.

3. Repeat Step 2 for passenger side Frame Bracket installation.

4. Next, remove the plastic grille and place it on a clean, stable work surface.

5. Select the driver side Top Support Bracket, (Figure 5B). Line up the holes in the bottom of the

Support Bracket with the threaded holes in the crossmember. Bolt the Support Bracket to the

crossmember with (2) 6mm x 25mm Hex Bolts, (2) 6mm Lock Washers and (2) 6mm Flat

Washers, (Figures 5A – 5C). NOTE: Replace factory 6mm screws, (if equipped), from

crossmember with 6mm hardware. Fully tighten the 6mm hardware only at this time.

Grill Guard

10-1.5mm x 120mm x 30mm Hex Bolts

Driver/Left Lower Frame Bracket

10mm x 30mm OD x 2.5mm Flat Washers

Passenger/Right Lower Frame Bracket

10mm x 20mm x 2mm Flat Washers

Driver/Left Top Support Bracket

10mm Nylon Lock Nuts

Passenger/Right Top Support Bracket

8-1.25mm x 25mm Hex Bolts

Driver/Left Top Mounting Bracket

8mm ID x 16mm OD x 1.6mm Flat Washers

Passenger/Right Top Mounting Bracket

8mm Lock Washers

12-1.75mm x 30mm Hex Bolts

6-1.0mm x 25mm Hex Bolts

12mm x 37mm OD x 3mm Flat Washers

6mm x 12mm OD x 1.6mm Flat Washers

12mm Nylon Lock Nuts

6mm Lock Washers

10-1.5mm x 30mm Button Head Allen

Bolts

6mm Allen Wrench

Passenger/Right Side Frame

Mounting Bracket

Driver/Left Side Frame

Mounting Bracket

Driver/Left Side Top

Mounting Bracket

Driver/Left Side Top

Support Bracket

Passenger/Right Side Top

Mounting Bracket

Passenger/Right Side Top

Support Bracket

1 2 3 4

Résumé du contenu

Page 1 - 07-12 TOYOTA FJ CRUISER

GRILLE GUARD 07-12 TOYOTA FJ CRUISER Page 1 of 4

Page 2

GRILLE GUARD 07-12 TOYOTA FJ CRUISER Page 2 of 4

Page 3

GRILLE GUARD 07-12 TOYOTA FJ CRUISER Page 3 of 4

Page 4

GRILLE GUARD 07-12 TOYOTA FJ CRUISER Page 4 of 4

Commentaires sur ces manuels

Pas de commentaire

Steelcraft-automotive 53300 GRILL GUARD Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Steelcraft-automotive 53300 GRILL GUARD. Steelcraft Automotive 53300 GRILL GUARD User Manual [en] [es] [fr] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Steelcraft-automotive 53300 GRILL GUARD