Steelcraft-automotive 52267 GRILL GUARD Manuel d'utilisateur télécharger pdf

GRILLE GUARD

2010 DODGE RAM 2500-3500

Page 1 of 2 4/15/10 (DP)

PARTS LIST:

Qty

Description

Qty

Description

Grille Guard

12-1.75mm Nylon Lock Nuts

Driver/Left Frame Mounting Bracket

10-1.5mm x 45mm Hex Bolts (Gr 10.9)

Passenger/Right Frame Mounting Bracket

10mm x 30mm OD x 2.5mm Flat Washers

12-1.75mm x 35mm Hex Bolts

10mm Lock Washers

12mm x 24mm OD x 2.5mm Flat Washers

10mm Hex Nuts

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS

CAREFULLY BEFORE STARTING INSTALLATION. ASSISTANCE IS HIGHLY RECOMMENDED.

2. Starting on the driver side, remove the (4) factory hex bolts and nuts, (Figure 1 & 2), securing the tow hook

to the frame. NOTE: It may be necessary to use a long extension to reach between the frame and the

radiator to remove the inner factory hex nuts, (Figure 2). Place the hardware and tow hook aside. Insert

the driver side Frame Mounting Bracket through the opening in the bumper and up to the mounting surface,

(Figure 3 & 4). Use the supplied longer (4) 10mm x 45mm hex bolts, (8) 10mm Flat Washers, (4) 10mm

Lock Washers and (4) 10mm Hex Nuts, (Figure 4), to go through the tow hook and the Frame Mounting

Bracket. Snug but do not tighten hardware at this time. Repeat this step for the passenger side Frame

Mounting Bracket installation.

3. With assistance, lift the Grille Guard up to the outside of the Frame Mounting Brackets. Insert (4) 12-

1.75mm x 35mm Hex Head Bolts, (8) 12mm 24mm OD x 2.5mm Flat Washers and (4)12mm Nylon Lock

Nuts, (Figure 5), through the Grille Guard and Brackets. IMPORTANT: Slowly open and close the hood to

check for clearance and fit of the Grille Guard and brackets. Adjust as necessary then snug but do not

tighten all of the hardware.

4. Stand back from the vehicle and check to see that the Grille Guard is centered and level on the vehicle and

adjust as necessary. Once properly aligned, tighten all of the hardware.

5. Do periodic inspections of the installation to make sure that all hardware is secure and tight.

To protect your investment, wax this product after installing. Regular waxing is recommended to add a

protective layer over the finish. Do not use any type of polish or wax that may contain abrasives that could

damage the finish.

For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild

soap may be used also to clean the Grille Guard.

For gloss black finishes: Mild soap may be used to clean the Grille Guard.

Driver side Frame

Mounting Bracket

Passenger side

Frame Mounting

Bracket

Complete Installation

1 2

Résumé du contenu

Page 1 - 2010 DODGE RAM 2500-3500

GRILLE GUARD 2010 DODGE RAM 2500-3500 Page 1 of 2 4/15/10 (DP) PARTS LIST: Qty Description Qty Description 1 Grille Guard 4 12-1.75mm Nylo

Page 2

GRILLE GUARD 2010 DODGE RAM 2500-3500 Page 2 of 2 4/15/10 (DP) Driver Side Installation Pictured

Commentaires sur ces manuels

Pas de commentaire

Steelcraft-automotive 52267 GRILL GUARD Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Steelcraft-automotive 52267 GRILL GUARD. Steelcraft Automotive 52267 GRILL GUARD User Manual [en] [es] [fr] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Steelcraft-automotive 52267 GRILL GUARD