Steelcraft-automotive 50297 GRILL GUARD Manuel d'utilisateur télécharger pdf

GRILLE GUARD

07-12 CHEVY TAHOE / AVALANCHE 1500/ SUBURBAN 1500

Page 1 of 5 3/6/12Rev1(DP)

PARTS LIST:

Grille Guard

12-1.75mm x 140mm Hex Bolts

Frame Mounting Brackets

12-1.75mm x 30mm Hex Bolts

Lower Support Brackets

12mm x 24mm OD x 2.5mm Flat Washers

Driver/Left Top Support Bracket

12mm Nylon Lock Nuts

Passenger/Right Top Support Bracket

6-1.0mm x 20mm Button Head Allen Bolts

Wrench S=4

6mm x 12mm OD x 1.6mm Flat Washers

12-1.75mm x 35mm Bolt Plates (#11)

6mm Lock Washers

12mm Plastic Retainers

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ

INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. ASSISTANCE IS

RECOMMENDED. CUTTING MAY BE REQUIRED.

2. NOTE: It may be necessary to remove/relocate front license plate and license plate bracket. It

is not required, but strongly recommended. If local/state law requires a license plate, a license

plate relocation kit is available.

3. Start installation from under the front of the vehicle. Remove the plastic lower bumper

reinforcements behind the outer ends of the bumper cover, (Figure 1). Next, remove the

factory tow hooks and trim rings if equipped, (Figures 2 & 3). NOTE: This Grille Guard is not

compatible with factory tow hooks.

4. Locate the (3) holes in the forward end of the frame channel. Insert (1) Bolt Plate into the open

end of the frame channel and out the rearmost hole in the side of the frame, (Figure 3).

Thread (1) 12mm Plastic Retainer Washer onto the threaded end of the Bolt Plate to help hold

the Bolt Plate in position during Bracket installation.

a. On the passenger side, the Bolt Plate will install through the outer wall of the frame rail.

b. On the driver side, the Bolt Plate will install through the inner wall of the frame, (Figures

5A & 5B).

5. Insert (1) Mounting Bracket up from behind the passenger side of the bumper and out through

the opening. Determine if the plastic trim rings need to be cut to clear the Mounting Brackets.

Repeat this Step for driver side Bracket fitment.

Frame

Mounting

Bracket

Frame

Mounting

Bracket

Driver/Left Top

Support Bracket

Passenger/Right Top

Support Bracket

(2) Lower Support Brackets

(2) 12mm x 35mm Bolt

Plates (pictured w/hardware)

1 2 3 4 5

Résumé du contenu

Page 1 - Page 1 of 5 3/6/12Rev1(DP)

GRILLE GUARD 07-12 CHEVY TAHOE / AVALANCHE 1500/ SUBURBAN 1500 Page 1 of 5 3/6/12Rev1(DP) PARTS LIST: 1 Grille Guard 2 12-1.75mm x 140mm He

Page 2 - Page 2 of 5 3/6/12Rev1(DP)

GRILLE GUARD 07-12 CHEVY TAHOE / AVALANCHE 1500/ SUBURBAN 1500 Page 2 of 5 3/6/12Rev1(DP) a. On vehicles without tow hooks: The bumper may have pla

Page 3 - Page 3 of 5 3/6/12Rev1(DP)

GRILLE GUARD 07-12 CHEVY TAHOE / AVALANCHE 1500/ SUBURBAN 1500 Page 3 of 5 3/6/12Rev1(DP) Inner wall of passenger side frame channel pictured from b

Page 4 - GRILLE GUARD

GRILLE GUARD 07-12 CHEVY TAHOE / AVALANCHE 1500/ SUBURBAN 1500 Page 4 of 5 3/6/12Rev1(DP) (Fig 5B) Inner wall of passenger side frame channel pictur

Page 5

GRILLE GUARD 07-12 CHEVY TAHOE / AVALANCHE 1500/ SUBURBAN 1500 Page 5 of 5 3/6/12Rev1(DP) Passenger Side Installation Pictured (3) 12mm x 30mm He

Commentaires sur ces manuels

Pas de commentaire

Steelcraft-automotive 50297 GRILL GUARD Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Steelcraft-automotive 50297 GRILL GUARD. Steelcraft Automotive 50297 GRILL GUARD User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Steelcraft-automotive 50297 GRILL GUARD