Steelcraft-automotive 72190 SPORT BAR Manuel d'utilisateur télécharger pdf

PARTS LIST:

1 Grille Guard 4 12-1.75mm x 30mm Hex Head Bolts

1 Passenger Side Mounting Bracket (D) 4 12mm Nylock Nuts

1 Driver Side Mounting Bracket (A) 4 12mm Lock Washers

1 Passenger Side Double Nut Plate (C) 4 12-1.75mm x 35mm Hex Head Bolts

1 Driver Side Double Nut Plate (B) 12 12mm ID x 30mm OD x 3mm Flat

Washers

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ

INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.

2. From underside of vehicle, remove the passenger and driver side rubber shroud located by the

bumper air inlet (Figure 1).

3. Through bumper air inlet, insert passenger side Double Nut Plate through existing hole on the

radiator support (Figure 2). NOTE: Use the larger round hole on the radiator support to insert

Double Nut Plate.

4. Center holes on the Double Nut Plate with holes on the radiator support.

5. Hang passenger side Mounting Bracket into position by partially treading (1) 10-1.50mm x 35mm

Hex Head Bolt, (1) 10mm Flat Washer, and (1) 10mm Lock Washer on the inner side of the

Mounting Bracket and trough already inserted Double Nut Plate (Figure 3). From underside of

vehicle proceed to install another Bolt with Washer and Lock Washer on the outer side of the

Mounting Bracket and trough Double Nut Plate. Do not tighten at this time.

6. Repeat steps 3-5 for driver side.

7. Position Sport Bar on the outer side of Mounting Brackets. Install Sport Bar onto Mounting

Brackets using the included (4) 12-1.75mm x 30mm Hex Head Bolts, (4) 12mm Nylock Nuts, and

(8) 12mm Flat Washers (Figure 4). Do not tighten at this time.

8. Level and adjust Sport Bar as desired; then tighten all hardware at this time.

9. Do periodic inspections to the installation to make sure that all hardware is secure and tight.

Page 1 of 2

2/12/07 (AM)

INSTALLATION INSTRUCTIONS

SPORT BAR

08 JEEP LIBERTY

PART #72190S

Remove this

plastic shroud

Bottom side

of radiator

(A) (D)

(B)

(C)

1 2

Résumé du contenu

Page 1 - INSTALLATION INSTRUCTIONS

PARTS LIST:1 Grille Guard 4 12-1.75mm x 30mm Hex Head Bolts1 Passenger Side Mounting Bracket (D) 4 12mm Nylock Nuts1 Driver Side Mounting Brac

Page 2 - Figure 5

Passenger Side ShownPassenger Side ShownPassenger Side ShownInstallation Complete Page 2 of 2 2/12/07 (AM)Figure 112mm

Commentaires sur ces manuels

Pas de commentaire

Steelcraft-automotive 72190 SPORT BAR Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Steelcraft-automotive 72190 SPORT BAR. Steelcraft Automotive 72190 SPORT BAR User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Steelcraft-automotive 72190 SPORT BAR