Steelcraft-automotive 200100 3 ROUND SIDE BAR Manuel d'utilisateur télécharger pdf

SIDE BAR

95-99 CHEVY/GMC TAHOE/ YOKON 2 DR

92-94 BLAZER/JIMMY 2 DR

1 of 2

IMPORTANT ALERT: GM uses a very strong thread-locking compound on all

body bolts. Use of an air assisted impact ratchet can cause damage to the

threads on factory body mount bolts and the internal nut assembly because of

this thread locking compound.

We only recommend the use of hand tools to slowly remove and reinstall body

mount bolts on all GM vehicles.

PROCEDURE:

CRITICAL INFORMATION: If during the removal process, it becomes increasingly

difficult to unscrew the body mount bolt with hand tools, tighten the bolt several

rotations to clear the thread locking compound from the threads, then reverse

direction and continue to unscrew until the body mount bolt is out. Repeat this

process as necessary on all GM body mount bolts. Use of an appropriate anti-

seize compound is highly recommended for re-installation. Tighten body mount

bolt to factory torque specifications for your particular model year.

Example of GM factory body mount bolt

1 2

SIDE BAR 95-99 CHEVY/GMC TAHOE/ YOKON 2 DR 92-94 BLAZER/JIMMY 2 DR 1 of 2 IMPORTANT ALERT: GM uses a very strong thread-locking compound on all bod

Page 2

2 of 2 Step One: Locate hardware and check contents with the hardware listed below. QTY DESCRIPTION 4 12mm x 120mm x 1.75mm hex bo

Pas de commentaire

Steelcraft-automotive 200100 3 ROUND SIDE BAR Manuel d'utilisateur