Steelcraft-automotive 280340 3 ROUND SIDE BAR Manuel d'utilisateur télécharger pdf

SIDEBAR

2011 KIA SPORTAGE

Page 1 of 4 1/11/11

(DP)

PARTS LIST:

Driver/Left Sidebar

10-1.50mm x 30mm Hex Bolts

Passenger/Right Sidebar

10mm x 30mm OD x 2.5mm Flat Washers

Driver/Left Front Mounting Bracket

10mm x 20mm OD x 2mm Flat Washers

Passenger/Right Front Mounting Bracket

10mm Lock Washers

Driver/Left Rear Mounting Bracket

10mm Hex Nuts

Passenger/Right Rear Mounting Bracket

8-1.25mm x 25mm Hex Bolts

Driver/Left Rear Support Bracket

8mm x 24mm OD x 2mm Flat Washers

Passenger/Right Rear Support Bracket

8mm Lock Washers

10-1.50mm x 30mm Rounded Bolt Plates

8mm Hex Nuts

10-1.50mm x 40mm T-Bolt Plates

6-1.0mm x 25mm Hex Bolts

10-1.50mm x 40mm Bolt Plates

6mm x 18mm OD x 1.6mm Flat Washers

8-1.25mm x 30mm Driver Side Rod Bolt

6mm Lock Washers

8-1.25mm x 30mm Passenger Side Rod

Bolt

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS

CAREFULLY BEFORE STARTING INSTALLATION.

2. Starting at the front, driver side of the vehicle, locate the round hole in the backside of the body panel,

(Figure 1). NOTE: The hole will be covered by sealing tape and undercoating. Use a small screwdriver

to locate and remove the tape.

3. Remove the rubber plug covering the hole in the bottom of the body panel next to the pinch weld,

(Figure 2). Insert the driver side 8mm x 30mm Rod Bolt into the large hole in the bottom of the body

panel and out the smaller hole in the backside of the body panel identified in Step 2, (Figure 3).

4. Next, locate the oval slot in the bottom of the inner frame channel, (Figure 4A). Insert (1) 10mm x

30mm Rounded Bolt Plate into the frame channel, (Figure 4B). Select the driver side Front Frame

Bracket. Hang the bracket from the 8mm Rod Bolt with (1) 8mm Flat Washer, (1) 8mm Lock Washer

Passenger/Right

Side Rear

Mounting

Bracket

Passenger/Right

Side Rear

Support Bracket

Passenger/Right

Side Front

Mounting Bracket

Driver/Left

Side Rear

Mounting

Bracket

Driver/Left Side

Rear Support

Bracket

Driver/Left Side

Front Mounting

Bracket

(2) 10mm x 40mm Bolt Plates

(for Rear Brackets only)

(2) 10mm x 40mm T-Bolt Plates

(for Rear Brackets only)

(2) 10mm x 30mm Rounded

Bolt Plates (use on Front

Brackets only)

8mm x 30mm

Passenger/Right

Side Rod Bolt for

Front Bracket

8mm x 30mm

Driver/Left Side

Rod Bolt for

Front Bracket

1 2 3 4

SIDEBAR 1
2011 KIA SPORTAGE 1

Résumé du contenu

Page 1 - 2011 KIA SPORTAGE

SIDEBAR 2011 KIA SPORTAGE Page 1 of 4 1/11/11 (DP) PARTS LIST: 1 Dri

Page 2

SIDEBAR 2011 KIA SPORTAGE Page 2 of 4 1/11/11 (DP) and (1) 8mm Hex Nut, (Figur

Page 3

SIDEBAR 2011 KIA SPORTAGE Page 3 of 4 1/11/11 (DP) Driver Side Installation P

Page 4

SIDEBAR 2011 KIA SPORTAGE Page 4 of 4 1/11/11 (DP) Driver Side Installation

Commentaires sur ces manuels

Pas de commentaire

Steelcraft-automotive 280340 3 ROUND SIDE BAR Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Steelcraft-automotive 280340 3 ROUND SIDE BAR. Steelcraft Automotive 280340 3 ROUND SIDE BAR User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Steelcraft-automotive 280340 3 ROUND SIDE BAR